1KW 2KW 3KW MAX Umthombo weLaser
I-PARAMETER
| Umzekelo | MFSC-1000 | MFSC-1500 |
| Amandla angeniswayo | 1000W | 1500W |
| Indlela yokuSebenza | CW/ Imodareyithwe | |
| Ukufezekiswa kwamandla | 10 ukuya kwi-100% | |
| Ubude bamaza | 1080 ± 10 nm | |
| Uzinzo lwamandla | ±1% | |
| Umgangatho weBeam yeLaser, iBPP | ≤ 1.5 mm x mrad (50μm QBH) | |
| Ukumodareyitha rhoqo | ≤ 20kHz | |
| Bona kwangaphambili Amandla okukhanya okuBomvu | 150 μW | |
| Ujongano | QBH(LOC) | |
| Ububanzi | 50 (25) μm | 50 (35) μm |
| Ukugoba iRadiyosi | 200 mm | |
| Supply Voltage | 220VAC (-15% ukuya + 10%) Inqanaba elinye | |
| Ubushushu bokusebenza | +10 ukuya +40℃ | |
| Ubushushu boGcino | -10 ukuya +60℃ | |
| Ukufuma | 10 ukuya kwi-85% | |
| Indlela yokupholisa | Ukupholisa Amanzi | |
| Ukupholisa okuPhakathi | Amanzi adiyiweyo/ Glycol Antifreeze | |
| Ubungakanani | 482.6×800×193mm (W×D×H) | |
| Ukusinda okushiyekile | 53 ( ±3 )kg | 57(±3) kg |
IINKCUKACHA
FAQ
1. Ithini imiqathango yakho yokuhlawula?
100% phambi kokunikezelwa. Siza kukubonisa iifoto zeemveliso kunye neepakethi
phambi kokuhanjiswa.
2. Kuthekani ngexesha lakho lokuhambisa?
A: Ngokubanzi, kuya kuthatha iintsuku ezi-3 emva kokufumana intlawulo yakho kwangaphambili. Ixesha elithile lokuhanjiswa lixhomekeke kwizinto kunye nobungakanani beodolo yakho.
3. Ngaba uyazivavanya zonke iimpahla zakho phambi kokuhanjiswa?
A: Ewe, sinovavanyo lwe-100% ngaphambi kokunikezelwa
4. Ulenza njani ishishini lethu ixesha elide kunye nobudlelwane obuhle?
1. Sigcina umgangatho olungileyo kunye nexabiso elikhuphisanayo ukuqinisekisa ukuba abathengi bethu bayazuza;
2. Sihlonipha wonke umthengi njengomhlobo wethu kwaye siqhuba ishishini ngokunyanisekileyo kwaye senze ubuhlobo nabo,
5. Ngaba unawo amanye amalungu asecaleni kwirutha ye-CNC njengemoto yokuphotha, igripper, icollet?
Sinazo zonke iintlobo zezixhobo malunga nomatshini wokukrola. Kwaye sinokuvumela iinjineli zikuncede uzicwangcise.
6. Ndingandwendwela umzi-mveliso wakho?
Ewe, wamkelekile kumzi-mveliso wethu.
